Volkel Hand Tap M 8 x 1.25

Application:

• for general use
• non abrasive material up to 900 N/mm²
• unalloyed and low alloyed steel
• for through and blind holes
• for thread cutting by hand

Contents:

• 1x Hand tap taper DIN 352 HSS-G – M 8 x 1.25 VÖLKEL 27342-1
• 1x Hand tap second DIN 352 HSS-G – M 8 x 1.25 VÖLKEL 27342-2
• 1x Hand tap finisher DIN 352 HSS-G – M 8 x 1.25 VÖLKEL 27342-3

Additional Attributes

• Type of thread metric ISO-thread DIN 13
• Standard DIN 352
• Material HSS-G
• Tolerance ISO 2 /6H
• Size Nominal diameter D 8 x 1.25
• Overall length (L1) 56 mm
• Thread length (L2) 22 mm
• Shank diameter (D2) 6 mm
• Drive connector Square 4.9 mm