Volkel Hand Tap M 1.1 x 0.25

Application:

• for general use
• non abrasive material up to 900 N/mm²
• unalloyed and low alloyed steel
• for through and blind holes
• for thread cutting by hand

Contents:

• 1x Hand tap taper DIN 352 HSS-G – M 1.1 x 0.25 VÖLKEL 27304-1
• 1x Hand tap second DIN 352 HSS-G – M 1.1 x 0.25 VÖLKEL 27304-2
• 1x Hand tap finisher DIN 352 HSS-G – M 1.1 x 0.25 VÖLKEL 27304-3

Additional Attributes

• Type of thread metric ISO-thread DIN 13
• Standard DIN 352
• Material HSS-G
• Tolerance ISO 2 /6H
• Size Nominal diameter D 1.1 x 0.25
• Overall length (L1) 32 mm
• Thread length (L2) 5.5 mm
• Shank diameter (D2) 2.5 mm
• Drive connector Square 2.1 mm
• Phone: +49 (0) 4101 78028 80