Volkel Hand Tap M 11 x 1.5

Application:

• for general use
• non abrasive material up to 900 N/mm²
• unalloyed and low alloyed steel
• for through and blind holes
• for thread cutting by hand

Contents:

• 1x Hand tap taper DIN 352 HSS-G – M 11 x 1.5 VÖLKEL 27348-1
• 1x Hand tap second DIN 352 HSS-G – M 11 x 1.5 VÖLKEL 27348-2
• 1x Hand tap finisher DIN 352 HSS-G – M 11 x 1.5 VÖLKEL 27348-3

Additional Attributes

• Type of thread metric ISO-thread DIN 13
• Standard DIN 352
• Material HSS-G
• Tolerance ISO 2 /6H
• Size Nominal diameter D 11 x 1.5
• Overall length (L1) 70 mm
• Thread length (L2) 24 mm
• Shank diameter (D2) 8 mm
• Drive connector Square 6.2 mm